Tallebung Substantial Increase to Mineral Resource Estimate
Released
Released
Announcement PDF
ASX: SKY
ASX ANNOUNCEMENT
23 January 2024
TALLEBUNG – SUBSTANTIAL INCREASE TO MINERAL RESOURCE
ESTIMATE WITH EXCEPTIONAL ORE SORTING UPGRADE
Updated JORC-2012 Mineral Resource Estimate (MRE) shows a 53% increase in total
tonnes from the maiden MRE* as well as a significant increase in the Exploration
Target. Updated MRE Indicated and Inferred Resources totals:
15.6Mt @ 0.15% tin for 23.2kt of contained tin at a 0.08% tin cut-off grade.
Exceptional results for the TOMRA Ore Sorting variability testwork at Tallebung show
consistent, very strong upgrades of the resource tin grade, results include:
TBD005 (206-232m): 0.17% tin upgraded 6.6x to = 1.10% tin (99.1% Tin recovery)
TBD008 (152-169m): 0.14% tin upgraded 5.1x to = 0.70% tin (98.6% Tin recovery)
TBD005 (2-22m):
0.21% tin upgraded 6.5x to = 1.38% tin (99.3% Tin recovery)
The extent of the Tallebung mineralisation has been substantially broadened with
results for three rock chips samples collected from outcropping quartz veins ~200m
past the current extent of drilling, including:
2.60% tin (OD20231020-1), 2.16% tin (OD20231020-2) & 1.55% tin (OD20231020-3)
The Board of Sky Metals Limited (‘SKY’ or ‘The Company’) is pleased to advise of the substantial increase in the
Mineral Resources Estimate and Exploration Target with exceptional ore sorting upgrades and potential for further
expansion of the resources from recent rock chip samples, all at the Tallebung Tin Project, NSW.
TALLEBUNG PROJECT (EL 6699, SKY 100%)
EXPLORATION TARGET
A new Exploration Target of approximately 23 – 32 Mt at a grade ranging between 0.14 - 0.17 % tin has been defined
from the drilling completed to date. The potential quantity and grade referred to above as the Exploration Target is
conceptual in nature, as there has been insufficient exploration to estimate a Mineral Resource and it is uncertain
if further exploration will result in the estimation of a Mineral Resource. SKY will commence drilling of this
exploration target in the coming months with at least 20 RC holes and diamond drilling with the aim to expand the
MRE and grow confidence in this estimated Exploration Target. Supporting report and further details on the
Mineral Resource Estimate and the definition of the Exploration Target are included below.
SKY CEO Oliver Davies commented: “The tin price is maintaining strong levels at 3x the copper price, making tin a
very high value commodity with continuing fragility present in global tin supply. These excellent results from
Tallebung are building SKY’s crucial position to produce low-cost tin from reliable and ethical sources at
Tallebung. TOMRA Ore Sorting is vital to this, these latest results from the ore sorting variability testwork show
consistent upgrading at Tallebung to over 0.6% Tin across the entire deposit, at current prices, 0.6% Tin equates
to over 1.5% copper in value.”
* For further details on the maiden MRE for the Tallebung Tin Project please see SKY ASX Announcement 22 March 2023.
SKY METALS LIMITED
+61 2 6360 1587
2 HAWTHORN PLACE, ORANGE NSW 2800
WWW.SKYMETALS.COM.AU
ABN 46 098 952 035
UPDATED MINERAL RESOURCE ESTIMATE
Independent geological consultants, H&S Consultants Pty Ltd (H&SC), was retained to provide an updated Mineral
Resource Estimate (MRE) for the Tallebung Tin Project. H&SC compiled the 115 holes drilled at Tallebung to date,
including 85 holes drilled by SKY since 2019, for approximately 19,098 assays in total, to produce the MRE. The MRE
has been reported in accordance with the 2012 JORC Code and Guidelines and the Inferred and Indicated MRE is
shown in Table 1.
Table 1 – Tallebung MRE showing total tonnage, grade and contained metals at a 0.08% Tin cut-off grade. NB:
WO3 refers to the Tungsten reported as an oxide as it is likely to be a significant by-product. Additionally, mtu
refers to metric tonne units which Tungsten is conventionally reported as, 1 mtu = 10 kg WO3.
Resource
Category
Tonnes
Grade
Contained Metal
Mt
Tin (%)
WO3 (%)
Tin (kt)
WO3 (mtu)
Inferred
Indicated
10.6
5.00
0.14
0.16
0.03
0.03
15.2
7.93
302,106
131,833
Total
15.6
0.15
0.03
23.2
433,940
Figure 1: Tallebung Tin Project – Plan showing extent of the current Exploration Target along with the drillholes
sampled for the TOMRA variability study testwork shown in yellow. TOMRA ore sorting shows a consistent 3-6x
upgrade across the entire deposit, significantly increasing average grade from 0.15% Tin to over 0.70% Tin.
2
Figure 2: Tallebung Tin Project – Plan showing extent of the current Exploration Target along with the identified
extensions to the mineralisation with the tin intercepted by the groundwater monitoring bore and the location of
the outcropping tin veins which substantially broaden the tin mineralisation footprint, overlaid on the geological
map. New results are in yellow.
TOMRA ORE SORTING UPGRADE
Excellent and consistent results have been received for the variability testing of TOMRA Ore Sorting, further
demonstrated the extremely amenable nature of the Tallebung tin mineralisation for ore sorting. The results show
that the product was upgraded on average over 5x across the entire deposit. An average of only 18% of the sorted
mass was in the product, leaving 82% of the mass to be rejected. The sorting product consistently contained
approximately 99% of the tin with no tin detected in the waste for all but one sample (Table 2).
Crucially, TOMRA ore sorting not only increases the tin grade but also greatly reduces the tonnes to be processed
to produce a saleable tin concentrate. There are a number of significant advantages of this reduction in mass for
any potential mining operation.
The sorted mass is reduced to only one fifth of the mass on average, with a much higher tin grade, this means:
Reduced Capex as only one fifth of sorted mass requires processing in a dedicated processing plant,
Opex of any mining operation will also be a fraction of any operation without ore sorting,
Excellent environmental outcomes including:
– A small fraction of the water will be required to produce saleable tin concentrates,
– A small fraction of the power will be required to produce saleable tin concentrates tin,
– Reduced mine footprint including smaller waste emplacements such as tailings dams.
3
The samples selected for the ore sorting variability testwork were selected from a variety of lodes across the
deposit, including near surface and at depth, as well as along the entire strike of the deposit (Figure 1). The purpose
of the testwork was to identify if there were any areas within the Tallebung deposit that were either better suited
to ore sorting or where ore sorting was found less be effective. All areas were discovered to be consistently and
exceptionally amenable to ore sorting.
The results of the testwork are consistent throughout the deposit, demonstrating a strong upgrade in all cases
with no tin detected in the ore sorting waste. As such, TOMRA ore sorting continues to demonstrate an exceptional
potential to establish Tallebung strongly as a very low-cost potential tin mining operation.
Table 2: Tallebung Tin Project – Results table for the TOMRA ore sorting variability testwork showing significant
4.6 - 6.6 times increase in tin grade and 1/5 reduction in mass for around 99% recovery of tin on average.
Sample
TBD005:
206-232m
TBD008:
152-169m
TBD006:
25-35m
TBD005:
2-22m
Feed
Size
Mass
Sorted
Accepted
Product
Head
Grade
Product
Grade
Upgrade
mm
kg
kg
kg
%
% Tin
% Tin
x
% Tin
%
8-32
158
26
132
16%
0.17
1.10
6.6
<0.01
99.1
8-32
100.3
19.3
81
19%
0.14
0.70
5.1
<0.01
98.6
8-32
43.2
10.5
32.7
24%
1.15
5.31
4.6
0.07
98.7
8-32
73.4
10.8
62.6
15%
0.21
1.38
6.5
<0.01
99.3
Product Waste
Waste
Tin
Grade Recovery
These results were from samples collected from four wide-diameter PQ diamond drillholes, namely TBD005TBD008. The samples were then sent to TOMRA Ore Sorting Solutions in Sydney and crushed to down into -32mm
grains. The sample was then split into 8-32mm fraction for sorting and a <8mm fines fraction which was too fine to
be sorted effectively and retained as fines for follow up Dense Medium Separation (DMS) testwork.
The 8-32mm fraction was then sorted with TOMRA’s XRT ore sorter into a product and waste. (NB: TOMRA’s XRT
sensor measures and sorts the samples based on the relative density of the samples. As tin is almost 3 times
denser than the waste material, the denser-tin-bearing sample is ejected as the product while the less dense and,
therefore, tin-poor sample, is the waste).
The TOMRA ore sorting results combined with the shallow, open pit Tallebung tin resource and simple gravity
processing of the tin, all contribute to establish Tallebung as a potential low-cost tin mining operation.
RESOURCE EXTENSIONS
In addition to this substantial expansion of the Tallebung MRE, quartz veining with visible cassiterite nuggets has
also been discovered in the base of the historic central lead open pit where alluvial tin resources were extracted
in the 1960s - 1970s. Three rock chip samples, OD20231020-1 – OD20231020-3, were taken of these outcrops and
assays have now been received (Figure 3 & Table 3).
The samples taken assay on average over 2.10% Tin which demonstrates the high-grade nature of the veins with
viable coarse cassiterite, characteristic of the Tallebung Tin Deposit. These results show the potential for further
extensions, outside of the already large 23 – 32 Mt Exploration Target estimated above as these results represent
a substantial increase in the tin mineralisation footprint at Tallebung (Figure 2).
4
Table 3: Tallebung Project – Rock Chip Samples.
Sample
Number
Easting Northing
mE
mN
RL
Grid
Tin
AHD
Comment
%
OD20231020-1
460455
6377173
292
MGA94_55
2.60
OD20231020-2
460448
6377165
293
MGA94_55
2.16
OD20231020-3
460456
6377172
291
MGA94_55
1.55
Quartz veins outcropping with coarse
cassiterite along margins of veining in base of
central lead, west of the beginning of the trees
before the main lead intersection with the
central lead open pit.
Quartz veins outcropping with visible
cassiterite and scheelite near mullock heap in
base of central lead.
Quartz veins outcropping with coarse
cassiterite in base of central lead, west of the
beginning of the trees before the main lead
intersection with the central lead.
Figure 3: Tallebung Tin Project – Rock chip samples pictured next to the outcropping quartz veins sampled.
5
MINERAL RESOURCE ESTIMATE – INFORMATION REQUIRED AS PER ASX LISTING RULE 5.8.1
As per ASX Listing Rule 5.8.1 and the 2012 JORC reporting guidelines, a summary of the material used to estimate
the Mineral Resource is detailed below (also in Appendix 1: JORC Table 1, Sections 1-3).
GEOLOGY AND GEOLOGICAL INTERPRETATION
The Tallebung Tin Deposit lies within EL6699 within Girilambone-Wagga Anticlinoral Zone of the Lachlan Fold Belt.
The zone comprises metamorphosed Ordovician aged sediments intruded by Silurian to Devonian granites. The
Tallebung Tin Field is situated in the eastern foothills of the Black Range, a ridge of resistant quartzite and slates
of the Tallebung Group which hosts the Tallebung Tin Deposit. Metamorphosed sediments of this group form the
bedrock to the unconsolidated sediments which host the cassiterite (a tin mineral) bearing buried leads. The
bedrock comprises metamorphosed siltstones and sandstones in altering bands, forming an irregular basement
profile.
The Tallebung Group sediments in the Tallebung Tin Field area outcrop as a sequence of weakly metamorphosed
shales, siltstones, carbonaceous mudstones, and minor quartz-rich sandstones. The rocks are tightly folded,
striking NNW at around 330o with variable dips. The Tallebung Group has been variously subdivided into five
mappable units by previous workers.
Several potential source granites are present in the region. The Erimeran Granite, a tourmaline and biotite rich
granite crops out to the north and west of the tenement area and is part of an extensive suite of low Ca- high K
granites. The Erimeran Granite is a composite evolved body with both foliated and massive phases and is
considered the probable source of the tin-tungsten mineralised fluids at Tallebung. The Erimeran Granite has been
dated at 419Ma, but it is likely that a range of Silurian ages are present, and that further work would subdivide the
Erimeran granite into several phases. The massive Derrida Granite is the closest outcropping granite to Tallebung.
This granite is a more mafic high Ca - low K variant that is unlikely to produce tin mineralisation. The Derrida
Granite is thought to be Middle to Late Silurian in age (~420Ma).
The Tallebung Tin Field represents a site of significant tin and tungsten production from high grade, quartz lodes
and their associated alluvial and deep lead deposits. The field has been worked sporadically from the discovery
of lode tin in the 1890’s, through to the large-scale open cut mining of alluvial tin by the Tullabong Tin Syndicate in
the period 1963 to 1971, with mining finally concluding in the mid-1980s.
The tin (Sn) and tungsten (W) bearing quartz reefs on the Tallebung Tin deposit are located on the western edge
of the worked out alluvial open cuts. The lodes form a well-developed quartz vein stock work zone extending for
approximately 1.6km on a 330o trend and are open along strike. Thicker quartz lodes greater than 0.5m have been
selectively exploited in historic shafts and shallow open cuts along the trend.
The meta-sediments are weakly to moderately ‘bleach’ altered with an alteration assemblage of silica-sericitechlorite. Bleaching alteration is more strongly developed as selvages to strongly mineralised vein packages. Tin
mineralisation occurs as cassiterite, hosted in mineralised quartz-sulphide veins including, in varying proportion:
pyrite, pyrrhotite, arsenopyrite, sphalerite, galena, scheelite, cassiterite, chalcopyrite, bornite, wolframite.
The geological interpretation shows that tin bearing quartz vein structures occur as discrete moderate east
dipping quartz vein ‘packages’ or ‘lodes’ interpretated to represent zones of structural dilation (Figure 5). The
structural preparation and dilation of the host units is related to two, northeast striking fault structures, which are
interpreted from regional aeromagnetic images.
The Tallebung tin mineralisation is hosted in quartz-cassiterite veining within a predominately homogeneous
sequence of less than 1m thick interbeds of sand and siltstones of the Tallebung Group which have been
deformed into tight isoclinal folds. Tin mineralisation is hosted in stockwork quartz veining or larger tensional
quartz veins +/- cassiterite + pyrrhotite + sphalerite + arsenopyrite + scheelite + chalcopyrite + wolframite.
6
Within veining at Tallebung, the tin mineralisation occurs as cassiterite and is present as large, often 5-10mm
wide ‘nuggets’.
DRILLING TECHNIQUES AND DRILL HOLE SPACING
The Mineral Resource Estimate for Tallebung is based only on core samples from diamond drill (DD) holes and drill
chip samples from reverse circulation (RC) percussion holes. Core/sample recovery has been recorded in many
cases and efforts were made to maximise recovery and, therefore, sample representivity. Details of sampling
procedures for earlier holes are limited but from inspection of the core at the W B Clarke Geoscience Centre where
the original drillcore is stored it appears that ‘industry standard’ methods of the time were employed and the drilling
is summarised in Table 4 (further details can be found below in Appendix 1: JORC Code, 2012 - Table 1).
Table 4 – Drill hole summary by year and company.
Year
1968-1969
2008
2019
2022
2023
Company
Dominion Mining Ltd
YTC Resources Ltd
Sky Metals Ltd.
Sky Metals Ltd.
Sky Metals Ltd.
Total
Holes
24
7
16 + 1 wedge
34
33
115
Metres
1,607.91
2,269.4
4,401.8
5,497.2
6,456.7
20,233.01
Type
DD
DD
RC/DD
RC/DD
RC/DD
Sn Assays
1,101
2,216
4,010
5,389
6,382
19,098
W Assays
1,101
2,216
4,010
5,389
6,382
19,098
Generally, drill hole spacing varies from 25m to over 100m. Drill hole spacing is variable across the deposit as the
data spacing has predominately focussed on geological mapping and identifying new zones of mineralisation
during the exploration stage of the project. To increase the confidence of the resources in this updated MRE, some
drilling has been completed to infill previous results to increase confidence, particularly in areas with high-grade
intervals. Infill drilling has established continuity of the tin lode system, however, further infill drilling is required to
increase the confidence for future resource estimations beyond the ~50 x 50m spacing completed to date.
SAMPLING, SUB-SAMPLING TECHNIQUES AND SAMPLE ANALYSIS METHOD
For the SKY drill core, sampling is by sawn half PQ & HQ core. Nominal sample intervals are 1m with a range from
0.3m to 2.0m. For RC Drilling, the total sample (~20-30kg) is delivered via cyclone into a large plastic bag which is
retained for future use if required. 1m intervals are split using a cone splitter on the rig into a separate calico at
the time of drilling. Historical DD holes, from 1968-1969, were sampled by sawn half core NQ core at intervals up
to 5 metres, although the average length was around 1m or 3 feet. Further sampling of these holes was completed
by YTC to sample previously unsampled core in the historic holes via sawn half or quarter NQ core.
Diamond drill holes were drilled as NQ size core for older holes, with triple tube PQ/HQ/NQ for recent SKY and YTC
holes. It is assumed that earlier DD holes were drilled with a standard core barrel. SKY and YTC completed core
orientation where possible but older holes were not orientated. The Reflex core orientation tool was used for the
SKY and YTC holes. All RC drilling were completed using face sampling hammers. RC holes were generally drilled
with a diameter of 144 or 127mm (further details can be found in above Table 4 and Appendix 1: JORC Code, 2012 Table 1).
Samples from SKY’s drilling in 2019, 2022 and a minority of samples from 2023 were sent to ALS Orange for
preparation and assaying, included weighing sample (lab code: WEI-21), crushing (lab code: CRU-31) consisting
of fine crush-70% <2mm. Sample was split (lab code: SPL-22) rotary splitter, and pulverised (lab code: PUL-23). Sn
and W were assayed by a lithium borate fusion with an ICP-MS finish (lab code: ME-MS85). Over limits were
assayed by respective ore grade oxidising fusion with a XRF finish analysis (lab codes: Sn-XRF15b/ME-XRF15b).
Historic drilling samples and YTC samples were assayed for Sn and W via glass bead XRF fusion.
A majority of samples from SKY’s drilling in 2023 were sent to SGS for preparation and assaying, included weighing
sample, crushing consisting of fine crush-70% <2mm (lab code: G_CRU_KG). Sample was split and pulverised (lab
7
code: G_PUL). Sn and W were assayed by a lithium borate fusion with ICP-MS finish (lab code: GE_IMS92A50,).
Over limits were assayed by respective ore grade method (lab code:Sn-GE_ICP92A50 and W by lab
code:GE_ICP92A50 by oxidising fusion with XRF finish). Historic drilling samples and YTC samples were assayed
for Sn and W via glass bead XRF fusion.
For the SKY and YTC samples, Certified Reference Material (CRM) and blanks were inserted at least every 50
samples to assess the accuracy and reproducibility of the results. The results of the standards were to be within
either ±10% variance from known certified results or certified 2 standard deviations depending on the CRM
analysed. If greater than 10% variance or 2 standard deviations, the standard and up to 10 samples each side
were re-assayed. Field duplicates were taken for RC samples and show strong repeatability. ALS and SGS
conducted internal duplicate and check samples every 20 samples as part of their internal QAQC procedures.
QAQC checks and results for standards and blanks are acceptable and demonstrate sufficient accuracy.
The density for the model was estimated using dry bulk density (DBD) measurements. These were calculated from
weight of dry drillcore divided by the dry drillcore weight minus the submersed drillcore weight. This method is
effective for fresh rock samples, however, where sample contained cavities or extensive clays which could be
infiltrated by water, as such some samples were wrapped in thin plastic cling film to ensure a true volume was
displaced when submersed in water to obtain a true DBD measurement. These samples used for DBD
measurements were from pieces of representative whole diamond drillcore samples at least 100mm long. The DBD
data was then used to allocate density for each assayed sample by way of a simple linear regression model; this
compared the sum of Fe + S + Sn + W with raw DBD data.
ESTIMATION METHODOLOGY AND CLASSIFICATION CRITERIA
All relevant data were entered by H&SC into a Micromine database where basic validation checks were performed
including duplicate entries, sample overlap, unusual assay values and missing data. This Micromine database was
then used for wireframing, block model creation, grade and DBD interpolation, and resource reporting. Visual
reviews of data were conducted by H&SC to confirm consistency with topography and hole collars, logging and
drillhole trajectories. The drillhole database for Tallebung is satisfactory for resource estimation purposes;
however, responsibility for quality control resides solely with SKY.
Block grade interpolation was completed using Ordinary Kriging, with a dynamic interpolation and sequential
grade threshold techniques, on 1m composite data. The grade distribution for Sn and W are slightly skewed so OK
with threshold/sequential top-cutting was considered to be an appropriate estimation method; there was an
insufficient amount of data per Sn lodes to allow the use of multiple indicator kriging (MIK). Leapfrog was used by
SKY to interpret and define the tin mineralisation lodes provided to HS&C. The wireframes and geological surfaces
are based on Leapfrog models of the seven mineralisation lodes identified at Tallebung. H&SC further refined these
lodes using Micromine mining software to ensure consistency, e.g. interpretations snapped to drill holes. These
tin mineralisation wireframes were used to control the selection of sample composites and their subsequent use
as the source data for the block model estimates.
Table 5 – Samples contained in each mineralised lode at Tallebung.
MRE Model
Lode
1
2
3
4
5
6
7
Total
Mar. 2023
Samples
562
1139
645
410
177
89
18
3083
Dec. 2023
Samples
983
1810
1164
774
333
193
40
5297
Geostatistical studies were undertaken for tin, tungsten and DBD within each of the seven lodes delineated at
Tallebung to date. Drillhole spacing for Tallebung ranges from 50 to 100m to 200m along strike and 25 to 100m on
section. Parent block sizes for Tallebung were 5m (X) by 10m (Y) by 5m(Z) and sub-blocked into eights in each
direction for grade estimation. Micromine was used for block grade (tin and tungsten) and DBD interpolation
(dynamic OK), and for block model reporting.
8
Sequential grade thresholds (sequential grade cutting) was applied as the grade distribution for Sn and W is
slightly skewed so ‘sequential grade thresholds’ were applied. Sequential grade thresholds are applied at different
search distances at the discretion of the competent person. Sn and W grade cuts were applied at the 99.0th, 99.3rd
99.5th and 99.9th grade percentile grade thresholds at respective search pass distances of 15, 30, 60 and 80%.
Future work may need to re-evaluate this to either model by MIK or incorporate and continue to use sequential
threshold top cutting.
Variography was moderately defined in a majority of the lodes, however, mainly due to a lack of drilling, particularly
in the along strike, two of the lodes modelled were noted to have poor variography. As variography was noted to
be similar between the lodes, the variograms developed for adjacent lodes with more data were used for two of
the seven lodes which did not have sufficient data to calculate their own variography.
Four (4) estimation search passes were used for all lodes, each with an increasing search radius and decreasing
number of data points. The 1st and 2nd passes were considered to demonstrate sufficient confidence in the
estimation of grade, continuity and thickness that they were considered appropriate to be classified as an
Indicated and Inferred resources respectively. The 3rd and 4th pass was used to provide a measure of exploration
potential at Tallebung to evaluate an Exploration Target.
Table 6 – Search Pass Parameters
Pass
x
y
z
1
2
3
4
20
20
20
30
50
75
75
150
50
75
75
150
Max
samples per
sector
7
6
6
6
9
Min total
Samples
Min Holes
Min per
hole
Max per
hole
8
7
4
4
3
2
1
1
1
1
1
1
12
12
12
12
Figure 4: Tallebung Project – Plan view of the Tallebung Tin Deposit coloured by search passes.
10
Figure 5: Tallebung Project – Cross-section of the Tallebung Tin Deposit in the vicinity of hole TBRC037 showing
the shallow dipping lodes delineated and modelled for Pass 1-4 of the MRE model - Top: blocks are coloured by
search pass; Bottom: blocks are coloured by Sn grade for Pass 1-4 of the MRE.
11
Search parameters are summarised in Table 6 The last passes were used to delineate exploration potential,
establish the range between the 3rd and 4th passes to be used for the range of the Exploration Target with a +/10% on the estimated grades as both the sequential top cut grade and uncut grade estimates of these two passes
were estimated to be very similar in modelling.
Search ellipses were locally aligned (via the dynamic interpolation method) to mimic the strike and dip of lodes.
This is done by using the dip and dip direction of the median plane/surface between the hanging wall and footwall
surfaces (created from the mineralisation solid/wireframe).
Model validation has consisted of visual comparison of block grades and composite values and indicated a
reasonable match. Comparison of summary statistics for block grades for both a sequentially top cut and uncut
model show only a 7-11% variation between the two estimates and comparison to sectional estimates completed
by SKY staff indicate that both the inferred and indicated resource estimate and the exploration target are in line
with SKY’s internal estimates.
The classification of the resource estimates is derived from the data point distribution (i.e. the drillhole spacing)
associated with the mineral wireframes with due consideration to other factors like grade continuity (variography),
geological understanding and continuity, drilling method and recovery, QAQC and density data. H&SC has been
advised by SKY that the deposits will be mined by open pit methods. SKY also advised H&SC of the cut off grades
to be used to report the resource estimates.
CUT-OFF GRADES AND MINING AND METALLURGICAL PARAMETERS
Tin resources recently estimated in NSW for open pit mining have used a 0.05% tin cut-off grade. Due to the early
level of economic evaluations completed on Tallebung at this stage, SKY considers a 0.08% cut-off grade to be
conservative based on the shallow nature of the resources, likely low-strip ratio, and low-cost processing
available based on the exceptionally favourable metallurgy of the deposit.
Regarding the exceptionally favourable metallurgy, SKY has conducted extensive metallurgical testwork including
the application of TOMRA Ore Sorting and Dense Medium Separation (DMS). These have shown to significantly
upgrade the tin mineralisation by at least 3-4 times or more as shown in this announcement and previous SKY ASX
announcements (please see SKY ASX Announcement 24 October 2022 and 6 December 2022).
The substantial increase in tin grade and reduction of the mass for intensive processing via inexpensive and simple
gravity methods by at least 75% has the strong potential to make Tallebung tin very economic to process. SKY has
also conducted gravity concentration testwork which has demonstrated a saleable +60% tin concentrate can be
cheaply and cost-effectively produced from the Tallebung tin mineralisation (SKY ASX Announcement 24 October
2022 and 6 December 2022).
12
This report has been approved for release by the Board of Directors.
ABOUT SKY (ASX: SKY)
SKY is an ASX listed public company focused on the exploration and development of high value mineral resources in Australia.
SKY’s project portfolio offers exposure to the tin, gold, and copper markets in the world class mining jurisdiction of NSW.
TIN PROJECTS
TALLEBUNG PROJECT (EL6699, 100% SKY)
The Tallebung Project is located ~70km north-west of Condobolin in central NSW. The project encompasses the historic
Tallebung Tin Mining Field at the northern extent of the Wagga Tin Belt within the central Lachlan Orogen where SKY has a
updated MRE of 15.6Mt @ 0.15% Tin*. SKY plans to advance the Tallebung by increasing the resource to the 16-21Mt*
Exploration Target and progress development for future mining (*SKY ASX Announcement 20 December 2023).
DORADILLA PROJECT (EL6258, 100% SKY)
The Doradilla Project is located ~ 30km south of Bourke in north-western NSW and is a large and strategic REE and tin
project with excellent potential for associated polymetallic mineralisation (tungsten, copper, bismuth, indium, nickel, cobalt).
NARRIAH PROJECT (EL9524, 100% SKY)
The Narriah Project is located ~70km west of West Wyalong in western NSW and represents a large tin project with
multiple historic workings prospective for tin, tungsten and lithium mineralisation with limited drill testing completed to date.
NEW ENGLAND PROJECT (EL9200, 100% SKY)
The exploration licence in the New England Orogen covers areas of significant historical tin production.
COPPER GOLD PROJECTS
IRON DUKE (EL6064, EL9191 100% SKY)
The Iron Duke project is located ~10km south
Share your feedback
Discover